Gestion de l'énergie d'un système multi-port à pertes intégrant une pile à combustible

Efficient regulation of the energy transfer between generating, storage and load subsystems is a topic of current practical interest. A new strategy to achieve this objective, together with its corresponding power electronics implementation, was recently proposed in this thesis work. The device is called dynamic energy router (DER) because, in contrast with current practice, the regulation of the direction and rate of change of the power flow is done without relying on steady–state considerations. A key assumption for the correct operation of the DER is that dissipation in the system is negligible. Unfortunately, in the presence of dissipation the original DER ceases to be operational. In this thesis a new DER that takes into account the presence of losses is proposed. Simulation and experimental evidence of the performance improvement with the new DER are presented. As a complement of this work a global convergent estimator of parameters of Polymer Exchange Membrane Fuel Cell (PEMFC) was designing by using the principles or “Immersion and Invariance” recently reported in control theory.Dans de nombreux réseaux, la régulation efficace du transfert d'énergie entre les sous-systèmes de production, de stockage et d'utilisation demeure un sujet difficile à traiter. Dans cette thèse on a proposent une nouvelle stratégie pour atteindre cet objectif, ainsi que sa mise en œuvre. Le dispositif est appelé routeur d'énergie dynamique (RED), parce que, contrairement à la pratique actuelle, l'asservissement de l'écoulement de puissance se fait sans s'appuyer sur des hypothèses stationnaire. Une hypothèse clé pour le bon fonctionnement du RED est que la dissipation du système est négligeable. Toutefois, en présence de pertes en ligne le RED initial n'est plus opérationnel, car il est base sur l'hypothèse clé de non dissipation des interconnections. Dans ce travail, un nouveau RED prenant en compte la présence de pertes est proposé. Des preuves de l'amélioration des performances sont présentées en simulation comme en expérimentation. Un complément de ce travail a été réalisée sur l'estimation des paramètres d'une pile à combustible du type Polymer Exchange Membrane (PEM) dans le but de concevoir un estimateur convergeant sur un grand domaine (convergence globale). Ce dernier utilise des principes d'immersion et d'invariance développés récemment dans la théorie des asservissements

Stack performance optimization of low power PEM Fuel Cell

For a PEMFC under operation, different causes of performance loss exist. Performance loss can increase when the system is scaled up to higher power. In this work the performance of low-power stacks manufactured in CICY is optimized through studies of the behavior and performance of single cells and stacks of own fabrication. The electrochemical technique polarization curve is used to provide insight into the performance of the cell and stack in operation. The design and materials of the components of the stack were established and the results demonstrate that for cells with catalyst layers deposited by electrospray the maximum power density of the single FC is higher than for cells prepared with the technique of dropping. The increase is significant, from 208 to 270 mW/cm2. Also, the optimization of the hot-pressing process of the MEA resulted in an improvement of the maximum power density up to 310 mW/cm2, while minimizing the canal-rib ratio improved the FC performance with about 16%. Compared to commercial PEMFCs, the performance however, is still low, which is related to the type of materials used

Aplicaciones electroquímicas al tratamiento de aguas residuales

El presente libro tiene como finalidad compilar numerosas investigaciones en el campo de la tecnología electroquímica y sus aplicaciones ambientales, contando con la colaboración de un gran número de investigadores tanto nacionales como extranjeros, proponiendo con ello una visión amplia dentro de la aplicación de la electroquímica. Los temas que integran esta obra se escogieron cuidadosamente considerando desde los principios básicos de la electroquímica aplicada al tratamiento de aguas residuales hasta los parámetros a considerar durante el diseño, operación y evaluación de dichos sistemas, sin dejar de lado las aplicaciones utilizadas en la actualidad en la industria, la docencia y la investigación. Este libro reúne diversas temáticas por lo que puede considerarse como un compendio de aquellos elementos que el lector requiere para poder tener una visión amplia de las aplicaciones de la electroquímica en el campo del tratamiento de agua residual.En el Capítulo 1 se presenta una primera impresión de los Fundamentes de la Electroquímica Ambiental, en donde los autores explican cómo esta disciplina es una nueva área de la ciencia en donde se emplean conocimientos de Electroquímica, Ingeniería Química y Ciencia de Materiales, así como las aplicaciones específicas para la remediación ambiental. En el Capítulo 2 los autores ofrecen una descripción de los principales parámetros fisicoquímicos y biológicos que se emplean para definir a la calidad del agua. Este capítulo describe en función de qué características físicas, químicas y biológicas se puede evaluar a un agua residual así como también la aplicación de estas características como variables de control de un proceso de tratamiento y también como el empleo de ellas para limitar las concentraciones máximas permisibles de descarga de aguas residuales. El Capítulo 3 se refiere a uno de los procesos más empleados en el tratamiento de agua: la coagulación-floculación. Se aborda desde una óptica teórica hasta la descripción de un ejemplo de aplicación en la industria. Resulta importante incluir este capítulo ya que uno de los métodos más prometedores en la electroquímica ambiental es la electrocoagulación, la cual se narra en el Capítulo 6. Las bases de las celdas de laboratorio y reactores industriales electroquímicos se relatan en el Capítulo 4. En particular, se refieren las implicaciones que tienen las principales características físicas y de diseño de celdas de laboratorio y reactores electroquímicos industriales que permiten obtener transformaciones eficientes gracias a un correcto control del potencial de electrodo en estos sistemas. La implementación de procesos electroquímicos para su aplicación a nivel industrial, requiere del diseño eficiente del dispositivo central: el reactor electroquímico. Por lo que, en el Capítulo 5 se presentan los elementos de análisis de reactores electroquímicos para su diseño y caracterización. El Capítulo 7 describe bajo qué circunstancias se puede llevar a cabo el proceso de electroflotación. Los autores muestran cómo este proceso está influenciado por el pH de la solución acuosa, la densidad de corriente y el tipo de electrodos que se emplean. El lector encontrará en el Capítulo 8 las bases teóricas de uno de los procesos que involucra la química de la reacción de Fenton, así como las aplicaciones ambientales para el tratamiento de soluciones sintéticas y reales con diferentes contaminantes refractarios, tales como plaguicidas, colorantes, productos de cuidado personal, fármacos y residuos químicos industriales. En el Capítulo 9 se presentan algunos conceptos fundamentales sobre la Electrooxidación, también conocida como oxidación electroquímica, la cual está enfocada a realizar la oxidación de contaminantes presentes en aguas residuales sobre la superficie de electrodos. La tecnología para la electrogeneración de peróxido de hidrógeno y su empleo en el tratamiento de agua residual se describe en el Capítulo 10. Uno de los metales pesados que tienen un alto grado de toxicidad en el ambiente es el Cr(VI), el cual no puede ser removido por métodos convencionales por lo que una tecnología que puede emplearse en este tratamiento se relata en el Capítulo 11. En el Capítulo 12 se presentan los avances más recientes cuando se emplean los métodos electroquímicos con algún otro tipo de tratamiento, lo que ha resultado en la obtención de sinergias en los procesos, lo que implica una reducción en los costos de operación. Finalmente, en el Capítulo 13, se presenta el tema de usos y aplicaciones de sensores químicos y electroquímicos para la detección de contaminantes en agua y agua residual

Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world

Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic. Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality. Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States. Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis. Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection

Worldwide trends in underweight and obesity from 1990 to 2022: a pooled analysis of 3663 population-representative studies with 222 million children, adolescents, and adults

Background Underweight and obesity are associated with adverse health outcomes throughout the life course. We estimated the individual and combined prevalence of underweight or thinness and obesity, and their changes, from 1990 to 2022 for adults and school-aged children and adolescents in 200 countries and territories. Methods We used data from 3663 population-based studies with 222 million participants that measured height and weight in representative samples of the general population. We used a Bayesian hierarchical model to estimate trends in the prevalence of different BMI categories, separately for adults (age ≥20 years) and school-aged children and adolescents (age 5–19 years), from 1990 to 2022 for 200 countries and territories. For adults, we report the individual and combined prevalence of underweight (BMI &lt;18·5 kg/m2) and obesity (BMI ≥30 kg/m2). For school&#x2;aged children and adolescents, we report thinness (BMI &lt;2 SD below the median of the WHO growth reference) and obesity (BMI &gt;2 SD above the median). Findings From 1990 to 2022, the combined prevalence of underweight and obesity in adults decreased in 11 countries (6%) for women and 17 (9%) for men with a posterior probability of at least 0·80 that the observed changes were true decreases. The combined prevalence increased in 162 countries (81%) for women and 140 countries (70%) for men with a posterior probability of at least 0·80. In 2022, the combined prevalence of underweight and obesity was highest in island nations in the Caribbean and Polynesia and Micronesia, and countries in the Middle East and north Africa. Obesity prevalence was higher than underweight with posterior probability of at least 0·80 in 177 countries (89%) for women and 145 (73%) for men in 2022, whereas the converse was true in 16 countries (8%) for women, and 39 (20%) for men. From 1990 to 2022, the combined prevalence of thinness and obesity decreased among girls in five countries (3%) and among boys in 15 countries (8%) with a posterior probability of at least 0·80, and increased among girls in 140 countries (70%) and boys in 137 countries (69%) with a posterior probability of at least 0·80. The countries with highest combined prevalence of thinness and obesity in school-aged children and adolescents in 2022 were in Polynesia and Micronesia and the Caribbean for both sexes, and Chile and Qatar for boys. Combined prevalence was also high in some countries in south Asia, such as India and Pakistan, where thinness remained prevalent despite having declined. In 2022, obesity in school-aged children and adolescents was more prevalent than thinness with a posterior probability of at least 0·80 among girls in 133 countries (67%) and boys in 125 countries (63%), whereas the converse was true in 35 countries (18%) and 42 countries (21%), respectively. In almost all countries for both adults and school-aged children and adolescents, the increases in double burden were driven by increases in obesity, and decreases in double burden by declining underweight or thinness. Interpretation The combined burden of underweight and obesity has increased in most countries, driven by an increase in obesity, while underweight and thinness remain prevalent in south Asia and parts of Africa. A healthy nutrition transition that enhances access to nutritious foods is needed to address the remaining burden of underweight while curbing and reversing the increase in obesit

Educación ambiental y sociedad. Saberes locales para el desarrollo y la sustentabilidad

EL LIBRO PERMITE REFLEXIONAR SOBRE LA IMPORTANCIA DE FOMENTAL LA EDUCACIÓN AMBIENTAL PARA RESOLVER LA PROBLEMÁTICA AMBIENTALEL LIBRO PRESENTA DIFERENTES TRABAJOS QUE ESTUDIAN EL TEMA D ELA SUSTENTABILIDAD, ENFATIZANDO LA IMPORTANCIA DE LA EDUCACIÓN AMBIENTAL Y LA TRANSDISCIPLINANINGUN

Socializing One Health: an innovative strategy to investigate social and behavioral risks of emerging viral threats

In an effort to strengthen global capacity to prevent, detect, and control infectious diseases in animals and people, the United States Agency for International Development’s (USAID) Emerging Pandemic Threats (EPT) PREDICT project funded development of regional, national, and local One Health capacities for early disease detection, rapid response, disease control, and risk reduction. From the outset, the EPT approach was inclusive of social science research methods designed to understand the contexts and behaviors of communities living and working at human-animal-environment interfaces considered high-risk for virus emergence. Using qualitative and quantitative approaches, PREDICT behavioral research aimed to identify and assess a range of socio-cultural behaviors that could be influential in zoonotic disease emergence, amplification, and transmission. This broad approach to behavioral risk characterization enabled us to identify and characterize human activities that could be linked to the transmission dynamics of new and emerging viruses. This paper provides a discussion of implementation of a social science approach within a zoonotic surveillance framework. We conducted in-depth ethnographic interviews and focus groups to better understand the individual- and community-level knowledge, attitudes, and practices that potentially put participants at risk for zoonotic disease transmission from the animals they live and work with, across 6 interface domains. When we asked highly-exposed individuals (ie. bushmeat hunters, wildlife or guano farmers) about the risk they perceived in their occupational activities, most did not perceive it to be risky, whether because it was normalized by years (or generations) of doing such an activity, or due to lack of information about potential risks. Integrating the social sciences allows investigations of the specific human activities that are hypothesized to drive disease emergence, amplification, and transmission, in order to better substantiate behavioral disease drivers, along with the social dimensions of infection and transmission dynamics. Understanding these dynamics is critical to achieving health security--the protection from threats to health-- which requires investments in both collective and individual health security. Involving behavioral sciences into zoonotic disease surveillance allowed us to push toward fuller community integration and engagement and toward dialogue and implementation of recommendations for disease prevention and improved health security

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

Closed-loop stability analysis of voltage mode buck using a proportional-delayed-integral controller

International audienceThis paper focuses on the design of a P-δ I controller for the stabilization of a buck dc/dc converter. The basis of this work is a geometric approach which allows to partition the parameters space of the controllers gain into regions in which the characteristic equation of the closed-loop system has a constant number of unstable roots. The main contribution of the paper is that it provides an explicit tool to find P-δ I gains ensuring the stability of the closed-loop system. In addition, the proposed methodology allows the design of a controller with a desired exponential decay rate σ. In order to illustrate the effectiveness of the proposed controller, several numerical examples are presented. © 2019 IEEE